By Tylar E. · 11 November 2026
Construction Takeoff Example: A Worked Takeoff From a Floor Plan
A construction takeoff worked from start to finish on one room: every measurement, the quantity takeoff, the material takeoff with waste, and the mistakes that throw the numbers off.
The short answer: a construction takeoff measures and counts everything on the drawings that has to be priced. A worked example for one 12' × 15' bedroom with an 8' ceiling gives 180 sq ft of floor, 54 linear feet of wall, 400 sq ft of net wall area after the door and window, and 180 sq ft of ceiling. Those quantities then become materials: about 14 sheets of drywall for the walls, 3 gallons of wall paint for two coats, and 198 sq ft of flooring with waste.
What a takeoff is, in one paragraph
A takeoff (or quantity takeoff) is the measuring step of an estimate. The estimator reads the drawings and lists every quantity that will cost money: lengths in linear feet, areas in square feet, volumes in cubic yards, and counts of items like doors, fixtures and outlets. Pricing comes afterwards. The takeoff answers "how much", and the estimate answers "what will it cost". A quantity takeoff measures the work as drawn; a material takeoff converts those quantities into what you order, with waste allowed.
The example: one bedroom from a floor plan
The drawing shows a bedroom 12'-0" by 15'-0" with an 8'-0" ceiling. It has one interior door, 3'-0" by 6'-8", and one window, 4'-0" by 3'-0". The electrical plan shows four receptacles, one switch and one ceiling light.
Before measuring anything, confirm the scale. Check the scale in the title block against a written dimension, because a PDF printed with "fit to page" no longer matches it. If you are measuring a printed sheet with a rule, the architectural scale converter turns sheet lengths into real ones.
Step 1: the quantity takeoff
Measure each quantity once and write down how you got it, so someone else can check it.
| Item | How it is measured | Quantity |
|---|---|---|
| Floor area | 12' × 15' | 180 sq ft |
| Room perimeter | 2 × (12' + 15') | 54 lf |
| Gross wall area | 54 lf × 8' ceiling | 432 sq ft |
| Door opening | 3' × 6'-8" | 20 sq ft |
| Window opening | 4' × 3' | 12 sq ft |
| Net wall area | 432 − 20 − 12 | 400 sq ft |
| Ceiling area | Same as the floor | 180 sq ft |
| Baseboard | 54 lf − 3' door | 51 lf |
| Doors | Count | 1 |
| Windows | Count | 1 |
| Receptacles | Count from the electrical plan | 4 |
| Switches | Count | 1 |
| Ceiling lights | Count | 1 |
Notice what the table does not contain: prices, brands or waste. A quantity takeoff records the work as drawn, so it can be checked against the drawing line by line.
Step 2: the material takeoff
Now turn each quantity into something you can order. This is where waste and product sizes come in. The waste allowances below are common starting points, not rules. Adjust them for the layout, the crew and the product.
| Material | Working | Order |
|---|---|---|
| Drywall, walls | 400 sq ft ÷ 32 sq ft per 4' × 8' sheet = 12.5 sheets, plus 10% waste = 13.75 | 14 sheets |
| Drywall, ceiling | 180 sq ft ÷ 32 = 5.6 sheets, plus 10% = 6.2 | 7 sheets |
| Wall paint, two coats | 400 sq ft × 2 coats = 800 sq ft ÷ 350 sq ft per gallon = 2.3 gallons | 3 gallons |
| Ceiling paint, two coats | 180 × 2 = 360 sq ft ÷ 350 = 1.03 gallons | 1 gallon and 1 quart |
| Flooring | 180 sq ft plus 10% waste = 198 sq ft; at 20 sq ft per box, 9.9 boxes | 10 boxes |
| Baseboard | 51 lf plus 10% = 56 lf; in 16' lengths, 3.5 lengths | 4 lengths |
Two judgement calls hide in that table. Some estimators do not deduct small openings from drywall, because the offcuts are rarely usable; deducting them, as here, gives the tighter number. And paint coverage varies by product and surface, so read the coverage on the can rather than trusting 350.
Step 3: check it before you price it
Most takeoff errors are not arithmetic. They are one of these:
- Wrong scale. A sheet printed at "fit to page", or a detail drawn at a different scale from the plan, shifts every number. Check one written dimension per sheet.
- Counted twice, or not at all. A receptacle shown on both the power plan and an enlarged plan gets counted twice. Mark each item as you count it.
- Openings and returns. Forgetting to deduct a large opening inflates areas; forgetting the return walls in a window reveal understates trim.
- Mixed units. Feet and inches mixed with decimal feet is the classic error. Pick one and convert once.
- No trail. A number with no working cannot be checked. Keep the "how measured" column.
For concrete, the same method applies with depth added: area × thickness gives volume, then convert to cubic yards. Measuring concrete quantities from drawings works through slabs and footings.
The same takeoff on a PDF
On paper you measure with a scale rule and keep the working in a spreadsheet. On a PDF, takeoff software does the measuring and keeps the working attached to the drawing. In ContractorCounter the bedroom above takes a few minutes:
- Calibrate the sheet against a written dimension.
- Draw a polygon around the room for the floor area, and trace the walls for the perimeter.
- Click each door, window and outlet with the count tool.
- Every measurement lands in the Bill of Quantities, where you add waste and rates.
Because each quantity is a shape on the sheet, anyone checking the takeoff can click a line and see exactly what was measured. That is the "how measured" column, kept automatically. See construction takeoff software for the full workflow, or try it on your own drawing with a free account.
FAQ
What is a takeoff in construction? It is the step of an estimate where you measure and count everything on the drawings that has to be priced: lengths, areas, volumes and item counts. Pricing comes after the takeoff.
What is the difference between a quantity takeoff and a material takeoff? A quantity takeoff measures the work as drawn, such as 400 sq ft of wall. A material takeoff turns that into what you order, such as 14 sheets of drywall once sheet size and waste are allowed for.
How much waste should a takeoff include? It depends on the material and the layout. Around 10% is a common starting point for drywall, flooring and trim on simple rooms. Diagonal flooring layouts, cut-up walls and patterned materials need more, and some materials such as ready-mix concrete are ordered with a smaller allowance.
How long does a construction takeoff take? A single room takes minutes. A full house or a commercial floor can take hours to days by hand, depending on how many trades you are taking off. Takeoff software mostly saves time on measuring and on rechecking after a revision.
Try it on your own drawing.
Mark up, measure and count a real PDF in the browser. Free preview, no card.